# Requirements

> The hardware, operating systems and network access Cascadia Enterprise devices need.

## Devices

| | Supported |
| --- | --- |
| Hardware | 64-bit Intel Core Ultra PCs. An Intel Arc GPU or NPU helps with larger models. |
| Windows | Windows 10 (22H2 or later) or Windows 11, x86_64. ARM64 Windows is not supported. |
| Linux | Ubuntu 22.04 or later, x86_64. |
| Access | Administrator rights (Windows) or `sudo` (Ubuntu) to install. |
| Disk | Room for the models you deploy. The first install fetches a small starter model. |

## Network

Each device needs outbound HTTPS to `console.cascadia.to` and `ca.cascadia.to` enabled.

The installer will open these ports for you on each device, for machines on the same local subnet only:

| Port | Protocol | Used for |
| --- | --- | --- |
| 9101 | UDP | Traffic between devices in your fleet |
| 9110 | TCP | Management commands, such as restarts and model changes |

The gateway your applications call listens on port 9100 on the device itself and isn't reachable from other machines, so it needs no firewall rule.

On Windows, these firewall rules apply only to networks set to **Private** or **Domain**. On a network Windows classifies as **Public**, they don't open. To fix this, change the network to Private under **Settings → Network & internet → your network → Network profile type**, or open the ports yourself.

Devices on different networks, or behind NAT, reach each other through a [relay](/enterprise/devices/configure-a-relay/).

## Fleet Manager

The [Fleet Manager](/enterprise/fleet-manager/install/) runs on 64-bit Windows, Ubuntu or Debian, and most other 64-bit Intel/AMD Linux distributions. Alpine and other musl-based distributions aren't supported.
