Skip to content
Docs
Enterprise
Supported
Hardware 64-bit Intel Core Ultra PCs. An Intel Arc GPU or NPU helps with larger models.
Windows Windows 10 (22H2 or later) or Windows 11, x86_64. ARM64 Windows is not supported.
Linux Ubuntu 22.04 or later, x86_64.
Access Administrator rights (Windows) or sudo (Ubuntu) to install.
Disk Room for the models you deploy. The first install fetches a small starter model.

Each device needs outbound HTTPS to console.cascadia.to and ca.cascadia.to enabled.

The installer will open these ports for you on each device, for machines on the same local subnet only:

Port Protocol Used for
9101 UDP Traffic between devices in your fleet
9110 TCP Management commands, such as restarts and model changes

The gateway your applications call listens on port 9100 on the device itself and isn’t reachable from other machines, so it needs no firewall rule.

On Windows, these firewall rules apply only to networks set to Private or Domain. On a network Windows classifies as Public, they don’t open. To fix this, change the network to Private under Settings → Network & internet → your network → Network profile type, or open the ports yourself.

Devices on different networks, or behind NAT, reach each other through a relay.

The Fleet Manager runs on 64-bit Windows, Ubuntu or Debian, and most other 64-bit Intel/AMD Linux distributions. Alpine and other musl-based distributions aren’t supported.